Operating instructions

Extended functions 8
55
We reserve the right to make any changes due to technical modifications.
Operating instructions RC30 programmable room thermostat • Issue 02/2006
8.19 Changing the standard display
You can change the standard display on the RC30 as follows:
Hold down the "Display" button and select the required standard
display with the dial.
The following values can be displayed as the standard display:
Release the "Display" button. The selected standard display has
now been saved.
Press the "Back" button or close the flap.
The standard display changes to your chosen display.
+
Setting Explanation
"ACT ROOM TEM" Actual room temperature (factory setting)
"SET ROOM TEM" Set room temperature
"OUTSIDE TEMP" Actual temperature outside the building
"BOILER TEMP" Actual boiler temperature
"DHW TEMP"
Actual DHW temperature in the DHW
cylinder
"OP MODE" Selected operating mode
"TIME" Current time
"DATE" Current date
"FLUE GAS TMP"
Actual flue gas temperature (if
temperature sensor fitted)
Tab. 6 Possible standard displays
USER NOTE
You can always adjust the set room temperature in automatic
mode, regardless of which standard display you choose. Whilst
you are adjusting the setting, the display changes to "SET ROOM
TEM" (see Chapter 7.3 "Setting the room temperature", page 24).