Operating instructions

Special functions (additional menu) 9
59
We reserve the right to make any changes due to technical modifications.
Operating instructions RC30 programmable room thermostat • Issue 02/2006
z Open the additional menu (see "Opening and using the
additional menu" page 57).
Using the dial select "ADD MENU HOLIDAY".
Press and release the "Display" button.
You are now in the "HOLIDAY" menu.
Hold down the "Display" button and select the required heating
circuit with the dial.
Release the "Display" button. Now you can choose between
– RC30 heating circuits (only displayed if heating circuit 1 and
heating circuit 2 are assigned to the RC30)
– Heating circuit 1 or 2
– DHW (including DHW circulation)
– Entire system (heating circuits and DHW)
You can now enter the start date for your holiday.
Hold down the "Display" button and select the required start date
with the dial.
Release the "Display" button. The start date is stored.
Now set the end date for your holiday.
Hold down the "Display" button and select the required end date
with the dial.
+
HOLIDAY
RC30 HEATCIR
USER NOTE
DHW heating is only switched off if both heating circuits are in
holiday mode (DHW heating "TO HT C PROG"). This does not
apply if you have entered a separate DHW or DHW circulation
program, however.
HOLIDAY
START DATE
21.12.02
+
+