Operating instructions

Special functions (additional menu)9
66 Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
9.5 Setting the Party function
With the Party function you can set the time at which the heating
normally switches to night mode to a later time. This extends
heating in day mode so that you can enjoy the company of your
guests later into the evening.
z Open the additional menu (see Chapter 9.1 "Opening and
using the additional menu", page 57).
Using the dial select "ADD MENU PARTY".
Press and release the "Display" button.
You are now in the "PARTY" menu.
Hold down the "Display" button and select the required heating
circuit with the dial.
Release the "Display" button.
You can now enter the number of hours for which you want to
continue heating in day mode (starting from now).
Hold down the "Display" button and select the required number of
hours with the dial. Example: "2 h".
You can enter a value from 0 to 99 (factory setting = 0).
Release the "Display" button. The number of hours is stored.
Press the "Back" button or close the flap.
The Party function is activated.
+
+
PARTY
NO OF HOURS
2 h