Operating instructions

Special functions (additional menu)9
68 Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
You can now enter the period of time for which you want the
heating to switch to setback mode.
Hold down the "Display" button and select the required number of
hours with the dial. Example: "4 h".
Your heating system will interrupt the normal heating mode for 4
hours. You can enter a value from 0 to 99 (factory setting = 0).
Release the "Display" button.
The number of hours is stored.
Press the "Back" button or close the flap.
The Pause function is activated.
Cancelling the Pause function early
Set the number of hours in the Pause function to "0" in order to end
it before the specified number of hours has elapsed.
+
PAUSE
NO OF HOURS
4 h
USER NOTE
Once the specified number of hours has elapsed, the Pause
function is deactivated.
If you want to use the Pause function again, enter the number of
hours again.