Operating instructions

Logamatic EMS RC35 programming unit - Subject to technical modifications
41
System settings (Service menu – Settings)
6
6.7 Contact details
Contact details are automatically displayed to the end user if a fault develops.
B Turn rotary selector anti-clockwise, until contact data is selected.
B Press to select contact data.
Menu SETTING\CONTACT opens.
Entering company name and telephone number
Two rows are available, each with 21 characters (capital letters, numbers and some other symbols).
The current cursor position will flash (marked by “_”).
1. Hold down and turn rotary selector at the same time to select another character.
Release .
The modified character is saved.
2. Turn rotary selector anti-clockwise or clockwise to move the cursor.
3. Enter a space to delete a character.
4. Press to save your entries and leave the menu.
Menu item Input range Other information
Name and tel. No. of
supplier:
_ _ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _
Tab. 17 Navigator for service menu SETTING\CONTACT
heating circuit 1
SERVICE\SETTINGS
B
solar data
RC35 calibration
contact data