Operating instructions

Diagnosis
Logamatic EMS RC35 programming unit - Subject to technical modifications
42
7
7 Diagnosis
The diagnosis service menu contains a number of tools for diagnosis:
• function test
1)2)
• monitor value
• error message
3)
• htg. charact. curve
•versions
B Press + + simultaneously to open the SERVICE MENU.
B Turn rotary selector anti-clockwise until diagnosis is selected.
B Press to open the SERVICE\DIAGNOSIS menu.
7.1 Function test
You can use this menu to activate separate EMS components individually in order to test their
functions
1), 2)
. The available functions and the possible settings vary depending on the system
installed.
B Hold down and simultaneously turn the rotary selector to change
the setting:
e.g. BURNER OFF to BURNER ON.
The change takes effect when you release .
B Turn rotary selector to change between different displays
(function test).
1) This function has a limited application on boilers with UBA-H3.
2) Not possible or not available with boilers with UBA1.x or DBA.
3) Boilers with DBA, UBA1.x or UBA-H3: restricted functionality only.
Note that the menu items shown will vary depending on the heating system.
SERVICE MENU
quick operation
settings
diagnosis
servicing
B
valve 1 cl. 2 cl.
FCT. TEST\BOILER
ignition OFF
flame OFF
flame current 0.0μA
B BURNER ON
act. boil. tmp. 60°C
FCT. TEST\BOILER
air temperature 32°C
flue gas temp. 78°C
flame OFF
B BURNER OFF