Operating instructions

Logamatic EMS RC35 programming unit - Subject to technical modifications
47
Information on setting the programming unit
6
6.2 Tips for energy efficiency
• You can save around 6 % on your heating costs by reducing the daytime
room temperature by 1 °C.
• Only heat if you need warmth. Use the switching programs for automatic
night setback.
• Air your home wisely: leave the windows wide open for a few minutes
rather than leaving them slightly open all the time.
• Close the thermostatic valves whilst airing heated rooms.
• Make sure that your windows and doors form a proper seal and do not allow slight draughts when
closed.
• Never position large objects such as a sofa immediately in front of radiators (maintain a clearance
of at least 50 cm). Otherwise, the heated air cannot circulate and heat the room adequately.
• You can also increase the energy efficiency of your DHW heating: compare the times when you
want your rooms to be warm with the times when you need hot water. It may be practical to use
a separate switching program to heat water.
• Arrange for your heating contractor to service your heating system annually.