Operating instructions

Getting started
Logamatic EMS RC35 programming unit - Subject to technical modifications
8
2
2 Getting started
Initial situation: the flap is closed.
What do I do ... Operation Display/result
if it is temporarily
too cool/warm in the
entire home on a
particular day?
B Turn rotary selector .
The current room temperature setting
starts flashing.
B Turn the rotary selector to set the
required room temperature.
B Release the rotary selector.
The modified room temperature is saved
(and stops flashing).
The standard display reappears.
In automatic mode, the modified room
temperature remains active until the next
switchover between night/day mode.
if it is permanently
too cool/warm in the
entire home?
→ Change room
temperature and
activate automatic
mode
B To change the day room temperature:
hold down and simultaneously turn
rotary selector .
B To change the nighttime room tempera-
ture: hold down and turn rotary
selector at the same time.
1)
B We recommend activating automatic
mode:
Press .
The modified room temperatures are
saved. The LED next to lights up.
Tab. 2 Getting started – room temperatures
SET ROOM TEMPERATURE
Until next switch
point, room temp.
changed to:
SET ROOM TEMPERATURE
Room temperature
setting for daytime
operation.
Automatic operation
selected.
Change between:
day:
night: