Manualshelf

Network Router - Wireless Bridge Router User Manual

ManualsBrandsBuffalo Technology ManualsSnow Blower54MBPS BRIDGE BASE STATION WLA-G54
12345678
2
Deciding on a Mode for Initial AirStation Configuration
Wired Connection (recommended)
Wireless Connection
Do not connect the AirStation to your existing network
until configuration of the AirStation is complete!
Step
Connect your computer to the AirStation
Buffalo recommends using a wired connection, meaning your computer is physically
connected to the AirStation with a CAT5 cable plugged into any one of the four
10/100M Ethernet LAN port. This type of setup will eliminate possible setup prob-
lems due to any issues with the wireless adapter on the computer being used to
configure the AirStation.
A Web browser version 4.5 or later should be used to configure the
AirStation.
Using the provided CAT5 Ethernet Cable, connect one end
into any one of the
four (4) 10/100M Ethernet ports
on the AirStation and the other to your comput-
er’s available Ethernet port. Figure shown above.
Wired Configuration