Mac User Guide DriveStation Combo USB 2.0 and Firewire Hard Drive Package contents: • • • • • • Main Unit (DriveStation) Power Cord USB Cable 1394/FireWire Cable DriveNavigator Installation CD User Guides v1.
Back Panel Layout Power On/Off Auto On/Off Manual On/Off 6 pin FireWire Plug for Power Adapter 4 pin FireWire USB 2
DriveStation Setup Press the power switch on the back of DriveStation to the OFF position. Plug DriveStation’s power cord into a power outlet. Then, connect a USB or firewire cable into a matching port on the back of DriveStation. Connect the USB or firewire cable to your Mac or other device you are adding the DriveStation to.
DriveStation Setup Flip the power switch on the back of the DriveStation to the ON (“I”) position. Your Mac will detect the new drive and place an icon on your desktop. Your DriveStation is now ready for use! Double-click on the icon to open the hard drive.
Technical Specifications USB Standards: USB Specification Rev. 2.0 Data Transfer Speed: Max 480 Mb/s (USB 2.0 Interface) Max 400 Mb/s (FireWire 400 interface) Seek Time: Max. 11 milliseconds Transmission Speed: Max. 480 Mbps Power Consumption: Max. 25W, Average 17W Power Supply: AC100V-240V 50/60Hz (autosensing) Dimensions: 1.77 x 6.41 7.86 inches (45 x 163 x 200 mm.) Weight: 2.8 lbs. (1.
http://www.buffalotech.com USA/Canada Technical Support is available 24 hours a day, 7 days a week toll-free: 866-752-6210 email: info@buffalotech.com Europe Technical Support is available between 9am-6pm (Monday-Thursday) (GMT) and 9am-4:30pm on Fridays. email: helpdesk@buffalo-technology.ie phone (UK only): 087 12 50 12 60* phone: +353 61 70 80 50 *Calls cost 8.5p per minute ©2005-2006, Buffalo Inc.
