TurboUSB Utility for DriveStation HD-HSU2 Series www.buffalotech.
The Buffalo TurboUSB utility can greatly improve the data transfer rates to and from your Buffalo USB hard drive. Other USB devices are not affected by TurboUSB software. Installation To install TurboUSB on your computer, insert your DriveNavigator CD in your computer’s CD drive. Click on TurboUSB Utility. Follow the wizard to complete the installation.
Using TurboUSB To use TurboUSB, you must first enable it. From the Start menu, choose Programs > BUFFALO > TurboUSB > TurboUSB for HD-HSU2. Click Enable and follow the directions to start TurboUSB.
When the wizard instructs you to disconnect and then reconnect the USB cable, click on the ‘Safely Remove Hardware’ icon in the systray and release the device before unplugging it. You may also turn TurboUSB off from the same window by clicking Disable and following the steps. You will have to unplug and reconnect the USB hard drive to complete disabling TurboUSB. Use the ‘Safely Remove Hardware’ wizard to release the drive before unplugging it.
Uninstalling To remove the Buffalo TurboUSB utility from your computer, click Start > Programs > BUFFALO > TurboUSB > Uninstaller. This will launch an uninstall screen. Click on Start to run the uninstallation.
Notes
www.buffalotech.com USA/Canada Technical Support is available 24 hours a day, 7 days a week toll-free: 866-752-6210 email: info@buffalotech.com Europe Technical Support is available between 9am-6pm (Monday-Thursday) (GMT) and 9am-4:30pm on Fridays. email: helpdesk@buffalo-technology.ie phone (UK only): 087 12 50 12 60* phone: +353 61 70 80 50 *Calls cost 8.5p per minute ©2005-2007, Buffalo Inc. v1.
