Manual

/it t^e
Page 12
OSX.X SETUP
9) Connecting the WLA-L11G to your network and to AC power.
9.1) Connect the WLA-L11G to your existing wired LAN.
Using the supplied ethernet cable, plug one end of the cable into an
open port of one of your existing ethernet hubs or switches. Plug the
other end of the ethernet cable into the port marked "10M/100M"
Picture 25
10M/100M
DC-IN 6-7V.
«•t*.
INIT Button
(Resets the
AirStation
to Default
settings)
on the back of the WLA-L11G
(Picture 25).
9.2) Connect the Buffalo AC
adapter to a 120V AC supply
and to the DC-IN of the
WLA-L11G (Picture 25).
Note:
If you will be configuring more advanced features such as WEP,
or connecting two WLA-LIIGs as a bridge, proceed to Step 3.
Otherwise, refer to Appendix B for setting the wireless Macs with OSX.x
and AirPort Card to use the WLA-L11G.
10) Setting up your Mac with OSX.x and AirPort Card to configure the
WLA-L11G.
10.1) Go to the Apple icon in the top left corner of your Desktop screen.
Scroll down to "System Preferences" and select.
Under "Internet & Network", select "Network" (Picture 26).
Internet & Network
i«* © Q tS
Picture 26
Internet Network QuickTime Sharing
10.2) Beside "Show", select "AirPort" (Picture 27).
Select the "AirPort" tab. Beside "Preferred
Network", select the ESS-ID of your WLA-L11G.
This number is found on the back of your
WLA-L11G, under "WIRED MAC ADDRESS".
The last six digits of this number plus the
word "GROUP" will be displayed beside
"Preferred Network".
SA«»
* TCFflP ) AMitTA T fÂSir'
00l04^tl76tS
frHf fti« fwtwt OiOOlACAOur
Picture 27