Manual

After setting up Roaming in the WLA-L11G, it will be necessary to
reselect the WLA-L11G in your AirPort Control Panel. Refer to StepIO
Pages 12-13, for reselection. Select ESS-ID "OOOOOOGROUP" for the
new network name. Close the AirPort Control Panel. Use your browser
return function twice to return to the "Radio Hardware Settings" screen.
Setting up security for the WLA-L11G.
Note: The WLA-L11G comes with several security features: WEP (Wired
Equivalent Privacy), password protection for the administration of the
WLA-L11G, and the ability to restrict the MAC (Machine Address Code)
addresses that are allowed to access the WLA-L11G.
13) Setting up WEP for the WLA-L11G.
13.1) Depending on the type of WEP you want to set up, choose "ASCII"
or "HEX" (Picture 39). The type of WEP is up to the user.
WARNING: If you have a 40-bit AirPort Card you must not input a
128-bit code. Consult your AirPort Card Documentation if you don't know.
40-bit WEP:
ASCII • input a five-digit code. Use any alphanumeric characters
and the underscore (_) sign. ASCII codes are case sensitive.
HEX - input a ten-digit code. Use any combination of numerals and the
letters A through F. HEX codes are not case sensitive.
128-bit WEP:
ASCII - Input a 13-digit code. Use any alphanumeric characters
and the underscore (_) sign. ASCII codes are case sensitive.
HEX - Input a 26-digit code. Use any combination of numerals and the
letters A through F. HEX codes are not case sensitive.
Page 16
Encryption Code (WEP) .
Confinn Encryption Code
<DASCnOHEX
Picture 39
13.2) Input the WEP code you selected into the boxes beside "Encryption Code"
and "Confirm Encryption Code" (Picture 39).
13.3) Select "Set" (Picture 40).
Set Picture 40