Manual

/it t^e
Page A-2
3) Go to the Apple icon in the top left corner of your Desktop screen.
Scroll down to "AirPort" and select. In the "Settings" section,
verify that "AirPort: On" is displayed, if it is not displayed, select the
"Turn AirPort On" button (Picture A-3).
In the "AirPort Network" section, go to "Choose network".
Click on the up/down symbols and select the AirStation's ESS-ID.
This will be a 6-digit alphanumeric followed by the word "GROUP".
Note: if Roaming was set up for two WLA-LUGs, select
"OOOOOOGROUP" (Picture A-3).
Close the AirPort Control Panel window.
[AirPort
_Status
8600BDGR0UP
Getting statue...
Signal level: C
^ Settings
_AirPort.
AirPort: On
Turn AirPort Off I
AirPort ID: 00 30 65 10 3D 2D
0 Allow eelection of closed networks
_ AirPort Network
Choose network: 8600BDGR0UP
D
Picture A-3
4) If WEP was configured during setup
of theWLA-L11G, input the WEP
code in the box beside "Password" and
select "OK" (Picture A-4).
the selected AirPort network requires a
password to join.
Password:
QAdd 10 Keychain
I Cancel I I OK
You should now be connected to your network.
Picture A-4