User's Manual

7 8
Client Manager
Use Client Manager to configure your wireless network.Use Client Manager to survey
and connect to available access points,enable and use WEP encryption,and create
connection profiles.
Installing Client Manager
1.Insert the AirNavigator CD. The AirNavigator dialog box will open automatically.
If the AirNavigator dialog box does not open automatically, select Start»Run and
enter D:\Setup.exe in the Open field to open the dialog box manually. D:
represents the letter assigned to the CD-ROM drive. If another letter is assigned to
the CD-ROM drive,your command should reflect that difference.Click the OK
button.Select Install Client Manager to launch the InstallShieldWizard.
2.Once the InstallShield Wizard launches,click the Next button to begin the software
installation.
3.Confirm that the installation location for the software is acceptable.To select an
alternate installation location,click the Browse button and select another location.
Click the Next button to continue to the Select Components page.
4.Select the components you want to install and click the Next button to continue to
the Start Copying Files page.
Note: Client Manager does not function properly if the Windows XP Wireless
Zero Configuration Service is enabled.