User Manual 54 Mbps* Wireless Ethernet Converter with AOSS WLI3-TX1-G54 PY00-30045-DM20-01
AOSS Installation System Requirements ◗ Desktop or Notebook computer with an Ethernet (RJ-45) port (for configuration purposes). ◗ Web Browser 5.0 or later. ◗ 802.11b or 802.11g access point (Infrastructure Mode) OR a different computer with an 802.11b or 802.11g wireless adapter (Ad-hoc Mode). AOSS Installation If your Wireless Router/Access Point supports Buffalo's AOSS technology, then it is recommended to use AOSS.
Conventional Installation Other than using AOSS, there are two conventional ways to configure the Ethernet Converter. One method is to use the Ethernet Converter Manager software. This method only works if there is a Windows 98SE/ME/2000/XP computer with a CD-ROM drive available on a computer network. The alternative method does not require software and works with any computer that has a Web Browser of 5.0 or later; this includes Macintosh and Linux machines.
Configuration with Ethernet Converter Manager If you have a Windows 98SE/ME/2000/XP machine with a CD-ROM drive available on your computer network, it is recommended to use the Ethernet Converter Manager to configure the Ethernet Converter. The following steps will guide you through configuring the Ethernet Converter via the Ethernet Converter Manager.
◗ Click on the text, 'Launch Setup'. ◗ The Ethernet Converter Manager software will run. Please select the 'Search for an Ethernet Converter' option from the 'Edit' drop down menu.
◗ The Ethernet Converter Manager will search for all Buffalo Ethernet Converters on your network. The process takes 15 seconds. Once completed, the 'Search Results' will appear. ◗ The 'Search Results' will list all Buffalo Ethernet Converters on the network. If there is more than one Ethernet Converter in the list, then select the Ethernet Converter you would like to configure. Press the 'IP Settings' button to continue configuration. ◗ Check the 'Use DHCP' checkbox and press the 'OK' button.
◗ The Ethernet Converter Manager Search Results will appear. If more than one Ethernet Converter is present, then select the proper Ethernet Converter from the list. Then press the 'Configure' button. ◗ The Ethernet Converter Manager will connect you to the Ethernet Converter's web based configuration. You will be prompted for a username and password. By default, the username is root and there is no password. ◗ After entering the user name, press the 'OK' button.
Configuration without Software Configuration of the Ethernet Converter without software is possible. The following steps will guide you through configuring your Ethernet Converter without software. ◗ Refer to your operating system documentation on how to configure a 'Static' IP Address. The Ethernet Converter has an IP Address of 1.1.1.1 by default. Thus, for successful configuration, the PC must be configured with 1.1.1.2 as its IP Address.
◗ Once your computer has a Static IP Address of 1.1.1.2, open your web browser and access the web page http://1.1.1.1 by typing it into the 'Address' field and pressing enter (as shown above). ◗ You will be prompted for a username and password. By default, the username is root and there is no password. ◗ After entering the user name, press the 'OK' button.
Web-Based Configuration The Web Based Configuration is where changes to the Ethernet Converter take place. Through the Web Based Configuration you can change the wireless network the Ethernet Converter is associated with, the IP Address of the Ethernet Converter, and other important settings. ◗ After logging in on the previous pages, you will be greeted by the main configuration page.
◗ After selecting a wireless network to connect to, you will be returned to the main Web Based Configuration page. NOTE: If the wireless network you are attempting to connect to is not broadcasting its SSID, then you will be required to manually enter the SSID into the SSID field. After it has been manually entered, then press the 'Apply Settings' button.
◗ The SSID field will be populated now. Depending on whether or not the wireless network is using WEP Encryption or not, the Encryption Key option may be set to 'Encrypt' or 'No Encryption'. If it is set to 'No Encryption' then you are already connected to the wireless network, and you may skip to the last step on this page. If the Encryption Key option is set to 'Encrypt' then you will need to enter the correct encryption type and key and press the 'Apply Settings' button.
◗ The Ethernet Converter configuration is complete. Disconnect the Ethernet Converter from the network connection and power adapter, and move it to the desired location. ◗ Plug the Ethernet Converter's LAN port into the wired device that requires the wireless Ethernet Converter (devices could be an XBox, PS2, Home Theatre Media Adapter, or another computer system). Plug the AC Adapter into a nearby power outlet and connect the power connector to the Ethernet Converter.
Advanced Configuration The Web Based Configuration also has several other settings to customize the way the Ethernet Converter operates. To access the Advanced Configuration settings, press the 'Advanced' button on the main Web Based Configuration page. On all advanced settings pages, the 'Apply Settings' button must be pressed anytime changes are made to a configuration page. Wireless Settings - This page contains the settings that affect the wireless communication of the Ethernet Converter.
◗ Wireless Mode - The wireless mode only applies to Ad-hoc connections. If the Ethernet Converter is making an Ad-hoc connection with an 802.11b client, then select '802.11b' from the drop down menu. If an 802.11g client is connecting to the Ethernet Converter then select the 'Auto - 802.11g / 802.11b' option. ◗ Basic Rates - The basic rate set only applies to Ad-hoc connections. Select the proper rate set for Ad-hoc client the Ethernet Converter is going to associate to.
Network Settings - This page contains the network IP Address settings of the Ethernet Converter ◗ Automatic IP Assignment - This setting specifies the Ethernet Converter to obtain its IP Address from a DHCP server on the network. Consult with your network administrator regarding whether this device should obtain its IP Address from a DHCP Server. ◗ Manual Assignment - This setting specifies the Ethernet Converter to operate on a specific IP Address. This is often referred to as a Static IP Address.
System Information - This page contains a summary of the Ethernet Converter's settings. ◗ The tables present a summary of the settings on the Ethernet Converter. Settings cannot be changed from this page. If the Ethernet Converter is obtaining its IP Address from a DHCP server, then a release and renew button will be present at the bottom of the page. Releasing the IP Address will make the Ethernet Converter impossible to configure without re-initializing the device or using the Ethernet Converter Manager.
◗ Configuration Limitations - The configuration limitations of the Ethernet Converter specify what types of clients can configure the Ethernet Converter through the Web Based Configuration. Prohibiting configuration from either wireless or wired clients can have negative effects on your ability to access the Web Based Configuration. Please be certain of your setting changes.
Firmware Update - This page contains settings that update the Ethernet Converter's Firmware. ◗ Updating the Ethernet Converter's firmware is a procedure where a user downloads a newer firmware from the Buffalo Technology Web Site and applies it to the Ethernet Con verter. New firmware files contain new software code that adds bug fixes, additional features, increased performance, and revised interfaces. ◗ To update the firmware, press the 'Browse' button and search for the downloaded firmware file.
Troubleshooting Troubleshooting - Below are some common troubleshooting tips: ◗ Re-initializing the Ethernet Converter - Re-initializing the Ethernet Converter is the process of returning the Ethernet Converter to default settings. This process is used if you cannot access configuration anymore, have lost the password to the Ethernet Converter, or desire to return the settings to the factory settings.
Technical Support USA&Canada Please have your Proof of Purchase when calling Buffalo Technical Support. Buffalo Technology offers toll-free technical support 24 hours a day, 7 days a week for this product. Customers in the United States and Canada can obtain technical support using the following information: ◗ Web ◗ E-mail: ◗ Telephone www.buffalotech.com/wireless info@buffalotech.com 866-752-6210 Europe Please have your Proof of Purchase when calling Buffalo Technical Support.
FCC / CE / R&TTE Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC / CE / R&TTE IMPORTANT NOTE: FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC / CE / R&TTE Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. Intended use This device is a 2.
FCC / CE / R&TTE Potential restrictive use This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states, except in France, Belgium and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links. In Belgium there is a restriction in outdoor use.
Warranty BUFFALO WARRANTY STATEMENT This Buffalo product comes with a 2-year limited warranty from the date of purchase. Buffalo Technology (Buffalo Inc) warrants in good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (Buffalo Inc) installed components.
Please have your proof of purchase receipt to get warranty support. All defective products shall be returned with a copy of proof of purchase. In no event shall Buffalo Technology (Buffalo Inc)’s liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. Buffalo Technology (Buffalo Inc) does not offer refunds for any product.