Use and Care Manual

ManualsBrandsBuffalo Tools ManualsOutdoorsECSS Electric Chainsaw Sharperner

ECSS

Electric Chain Saw Chain Sharpener

Assembly & Operating Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

This manual provides important information on proper operation and maintenance. Every effort has been

made to ensure the accuracy of this manual. We reserve the right to change this product at any time

without prior notice.

STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER.

Questions? Problems? CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website

http://www.buffalotools.com

or call our customer help line at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM Central Time. A copy of

the sales receipt is required.

ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions

Summary of content (12 pages)

PAGE 1
ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! DO NOT RETURN THIS PRODUCT TO THE RETAILER. Questions? Problems? CONTACT CUSTOMER SERVICE.
PAGE 2
TABLE OF CONTENTS RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS.......................................................................... 2 SERVICE........................................................................................................................................................ 5 SPECIFIC SAFETY RULES AND/OR SYMBOLS.......................................................................................... 6 PACKAGE CONTENTS ...................................................................
PAGE 3
GENERAL PRODUCT SPECIFICATIONS FEATURES: • 120V / 60 Hz • 4200 RPM Grinding Speed • 4 ¼” x 1/8” • 7/8 Inch Arbor • Motor 120V, 60Hz, 85 Watts • RPM 4200 • Vise Capacity 0.80" to 0.50" • Table Vise Angles 35 Degrees Right to Left • Arbor Diameter 7/8" • Wheel Dimensions 4-1/4"Dia. x 1/8" Thick • Overall Dimensions 9"W x 10"L x 12-1/8"H SPECIFICATIONS • Rated Voltage • Watts 120V / 60 Hz 50 Watts KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE REFERENCE.
PAGE 4
IMPORTANT SAFETY RULES COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT. THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury. Do not operate tools in explosive areas, such as in the presence of flammable liquids, gases or dust. Tools can create sparks which may ignite the dust or fumes. Keep bystanders, children and visitors away while operating a power tool.
PAGE 5
Wash hands after handling the power cord. Touching the power cord could expose you to lead, which is known in the State of California to cause cancer, birth defects and other reproductive harm. Use common sense while operating this power tool. Do not use this tool if you are: Feeling tired or are under the influence of alcohol or drugs. Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts. Overreaching or have improper footing.
PAGE 6
IMPORTANT SAFETY INSTRUCTIONS Before using this tool, you need to become familiar with its operation. If you are unsure about the operation of the tool, or have any questions about its proper use, call the Customer Service Department at 1-888-287-6981. Follow these instructions for safe handling of the tool: • Be sure your work area is clean and secure before turning the power switch into the “ON” position. Be sure the area is free from all foreign material, nails, staples, or any other material.
PAGE 7
COMPONENTS 8 10 1 5 3 9 1 4 2 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) Lock Stop Base Lock Wheel Sliding Guide Adjustment Lever Grinder Lock Cap Top Housing Chain Saw Chain (Example) Base Grinding Wheel Cover Grinding Wheel Power On / Off (not shown) Bolt Hole For Mounting Sliding Guide 11 7 12 6 ASSEMBLY Always use the proper grinding wheels. Grinding wheels that do not properly fit will cause loss of control.
PAGE 8
1. Do not use a grinding wheel if it is chipped, cracked or worn. You can check if the wheel has cracks not visible to the human eye by hanging it up by the central hole and tapping it with a non-metal object (ie: screwdriver handle). If it is in good condition it will produce a metallic sound. A dull sound indicates a crack or break. 2. Only use grinding wheels that fit the arbor (7/8"). Do not try to change or modify the mounting hole on a grinding wheel to make it fit. 3.
PAGE 9
OPERATION Wear safety eyewear and dust filters or respirators while using this tool. Keep hands and fingers away from the rotating Grinding Wheel while it is in operation. Your fingers can get stuck inside the rotating wheel and cause serious injury to the user. 1. Clean the chain before sharpening it. Wash it with a non-flammable solvent. Don't use Gasoline to dry the chain. 2. Lift up the Chain Stop and secure the chain in the Sliding Guides. 3.
PAGE 10
Sharpening 1. Put on your protective gear and make sure the immediate area is clear of bystanders. 2. Plug in the Power Cord and press the green button on the Switch Plate to turn on the machine. 3.Slowly lower the grinding wheel. If you notice slight errors in your settings, turn off the unit and unplug it before you make your adjustments. Note: A good grind occurs when the contact between the wheel and the teeth are gradual and smooth. Do not stop too long on each tooth. 4.
PAGE 11
PARTS DIAGRAM PARTS LIST ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions 11
PAGE 12
NOTES: (ECSS0909) ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions 12