User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Product Overview
- Chapter 2 - Installation
- Chapter 3 - Connect to a Wireless Network
- Chapter 4 - Client Manager
- Software Overview
- Using Client Manager V
- Opening and Closing Client Manager
- Main Screen
- Automatic Secure Setup and Advanced Setup
- SSID / WPS-PIN selection
- Searching Wireless Access Points
- Wireless Network Information
- WPS-PBC / AOSS selection
- Wireless Status
- Wireless LAN Diagnostic
- Profile List
- Wireless Properties
- Network Properties
- Browser Properties
- Printer Properties
- Using Client Manager 3
- Chapter 5 - Trouble Shooting
- Appendix
Chapter 3 Connect to a Wireless Network
WI-U2-800D / WI-U2-400D User Manual 21
This screen will be displayed.
4
Use a PC with a wired Ethernet connection to log in to the access point’s management utility.
Note: If the access point you are trying to connect is a Bu alo AirStation, click Wireless Con g > WPS from the
home page of the con guration interface. The screen to enter the PIN code will be displayed.
5
Navigate to the WPS PIN
con guration screen, then enter
the PIN that you write down in
step 6.
Note: If the access point you are
trying to connect is a Bu alo
AirStation, enter the PIN in
“Enrollee PIN” eld and click
[OK].
When “Connection has been Completed” is displayed in Client Manager 3, your connection is
complete.