User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Product Overview
- Chapter 2 - Installation
- Chapter 3 - Connect to a Wireless Network
- Chapter 4 - Client Manager
- Software Overview
- Using Client Manager V
- Opening and Closing Client Manager
- Main Screen
- Automatic Secure Setup and Advanced Setup
- SSID / WPS-PIN selection
- Searching Wireless Access Points
- Wireless Network Information
- WPS-PBC / AOSS selection
- Wireless Status
- Wireless LAN Diagnostic
- Profile List
- Wireless Properties
- Network Properties
- Browser Properties
- Printer Properties
- Using Client Manager 3
- Chapter 5 - Trouble Shooting
- Appendix
WI-U2-800D / WI-U2-400D User Manual 22
Chapter 3 Connect to a Wireless Network
Manual Setup (Client Manager)
You may also connect to an access point manually, without using AOSS or WPS. The procedure varies
depending on the version of Windows used.
First, install Client Manager from the included CD. See chapter 2 for instructions on installing Client
Manager.
Windows 8, 7 or Vista (Client Manager V)
With Windows 7 or Vista, use Client Manager V to connect wirelessly.
1
2
Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [Client Manager V].
Click [Create Prole].
3
The User Account Control screen is displayed. Click [Yes] or [Continue].