User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Product Overview
- Chapter 2 - Installation
- Chapter 3 - Connect to a Wireless Network
- Chapter 4 - Client Manager
- Software Overview
- Using Client Manager V
- Opening and Closing Client Manager
- Main Screen
- Automatic Secure Setup and Advanced Setup
- SSID / WPS-PIN selection
- Searching Wireless Access Points
- Wireless Network Information
- WPS-PBC / AOSS selection
- Wireless Status
- Wireless LAN Diagnostic
- Profile List
- Wireless Properties
- Network Properties
- Browser Properties
- Printer Properties
- Using Client Manager 3
- Chapter 5 - Trouble Shooting
- Appendix
WI-U2-800D / WI-U2-400D User Manual 40
Chapter 4 Client Manager
Wireless LAN Diagnostic
On the Wireless LAN Diagnostic screen, you can check signal strength and quality.
Parameter Meaning
Adapter Displays the name of the wireless client currently in use.
Connection status Displays signal strength (dBm), link rate (Mbps), and signal quality
(%) in 1 minute intervals.
There are the following restrictions.
• Some items may not be displayed depending on your wireless
device.
• Signal strength and quality displays may vary depending on
wireless devices.
These graphs should not be used to compare dierent wireless
devices. Use this information to check wireless status for the
same wireless device.
Usage of each channel The 11b/11g displays usage of each channel on 2.4 GHz.
The 11a displays usage of W52/W53/W56 channel. (WLI-UC-AG300N
only)
The color expresses the signal strength of an access point. Closer to
red means stronger signal, and closer to blue means weaker signal.