User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Product Overview
- Chapter 2 - Installation
- Chapter 3 - Connect to a Wireless Network
- Chapter 4 - Client Manager
- Software Overview
- Using Client Manager V
- Opening and Closing Client Manager
- Main Screen
- Automatic Secure Setup and Advanced Setup
- SSID / WPS-PIN selection
- Searching Wireless Access Points
- Wireless Network Information
- WPS-PBC / AOSS selection
- Wireless Status
- Wireless LAN Diagnostic
- Profile List
- Wireless Properties
- Network Properties
- Browser Properties
- Printer Properties
- Using Client Manager 3
- Chapter 5 - Trouble Shooting
- Appendix
Chapter 4 Client Manager
WI-U2-800D / WI-U2-400D User Manual 51
Proles
Connect to an access point or edit a prole.
Parameter Meaning
Connect Selecting a prole and clicking this button will connect to an access
point using a stored prole.
Add Click this to add a new prole. It will display the Proles Information
screen (next page).
Edit Click this to edit or delete information in a prole.
WPS AOSS Click this button to have AOSS/WPS (PBC) automatically set security.
After connection, a prole based on these settings will be created.
802.1x Proles This button is displayed when Client Manager is operating in
Business Mode. Click to congure 802.1x authentication.