User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Product Overview
- Chapter 2 - Installation
- Chapter 3 - Connect to a Wireless Network
- Chapter 4 - Client Manager
- Software Overview
- Using Client Manager V
- Opening and Closing Client Manager
- Main Screen
- Automatic Secure Setup and Advanced Setup
- SSID / WPS-PIN selection
- Searching Wireless Access Points
- Wireless Network Information
- WPS-PBC / AOSS selection
- Wireless Status
- Wireless LAN Diagnostic
- Profile List
- Wireless Properties
- Network Properties
- Browser Properties
- Printer Properties
- Using Client Manager 3
- Chapter 5 - Trouble Shooting
- Appendix
WI-U2-800D / WI-U2-400D User Manual 60
Chapter 5 - Trouble Shooting
The Computer does not Recognize the Wireless
Adapter.
• Make sure that the AirStation is connected to a USB port on your computer.
• If your computer has multiple USB ports, connect to a dierent USB port.
• Refer to chapter 2 to reinstall drivers for this unit.
You Cannot Connect to the Network Wirelessly.
• Refer to chapter 3 to connect this unit to an access point wirelessly.
• Congure the same SSID, encryption method, and encryption key for each wireless device.
These settings must match those of your wireless access point.
• move your wireless devices closer to the access point.
• Restart your access point.
You Forgot the AP’s SSID, Encryption Key, or
Password.
• Ask your network administrator about your SSID and encryption settings. These settings must
match the SSID and encryption settings of the access point.
• If your access point supports AOSS or WPS, try using them to connect to the access point.
Instructions for connecting with AOSS or WPS are in chapter 3.