User's Manual

104
4 Set the WAN-side server and port number under “Remote Settings”.
5 If you need to use a specific port, most network applications and services will have their required protocols and
ports listed in their documentation.
6 Enter the IP address or MAC address of the network device for QoS priority.
7 Click [Add].
Once an entry has been saved, you can click [Edit] to change it or [Delete] to remove the entry. Click [Delete All] to
remove all saved entries.
How to configure TCP/IP
Windows 8
To configure TCP/IP in Windows 8, follow the procedure below.
1 Open Control Panel.
2 Click [Network and Internet].
3 Click [Network and Sharing Center].
4 Click [Change Adapter Settings] on the left side menu.
5 Right-click the network adapter, then click [Properties].
6 If the User Account Control screen opens, click [Yes] or [Continue].
7 Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
8 To have DHCP set your IP address settings automatically, check “Obtain an IP address automatically” and “Obtain
DNS server address automatically”.
Alternately, you can configure the settings manually. Example:
If the router’s IP address is 192.168.11.1,
IP address: 192.168.11.80
Subnet mask: 255.255.255.0
Default gateway: 192.168.11.1
Preferred DNS server: 192.168.11.1
Alternate DNS server: blank
9 Click [OK].