User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Setup
- Chapter 2 - Settings
- Easy Admin
- Advanced Settings
- Internet
- PPPoE
- Dynamic DNS
- PPTP
- NAT
- LAN
- DHCP Lease
- Routing
- 2.4 GHz
- 5 GHz
- WPS
- AOSS
- MAC Filtering
- Multicast Control
- Guest Account
- Wireless Bridge
- Firewall
- IP Filter
- VPN Passthrough
- Port Forwarding
- DMZ
- UPnP
- Web Filtering and Parental Controls
- Disk Management
- Sharing
- WebAccess
- Media Server
- BitTorrent
- QoS
- eco Mode
- Network USB
- System
- Syslog Settings
- Reset / Reboot
- Update
- System Information
- Logs
- Packets
- Ping
- Chapter 3 - Wireless
- Chapter 4 - Utilities
- Chapter 5 - Troubleshooting
- Appendix A - Supplemental Information
- Appendix B - Tutorials
- Configuring the AirStation for Optimal Performance and Security
- Sharing a Printer
- Configuring Parental Controls
- Port Forwarding Basics
- Setting Up Port Forwarding Rules
- Configuring a USB Drive as a NAS
- Adding a Second AirStation as a Wireless Client
- Saving and Restoring Settings
- Setting Up WebAccess
- Connecting Wireless Devices Using AOSS
- Setting Up a VPN Server
- Using AirStations with 2Wire Residential Gateways
- How to Use QoS
- How to configure TCP/IP
19
Chapter 2 - Settings
Settings lets you change advanced settings for the AirStation.
Easy Admin
Home
When you first open Settings, the Easy Admin page is shown. From this page you can easily configure common settings.
The examples below assume the AirStation is in router mode.
Parameter Meaning
Wireless Displays current wireless status. Click the panel to configure wireless settings.
AOSS/WPS Displays current AOSS/WPS status. Click the panel to run AOSS/WPS.
USB Storage
Displays the status of USB storage connected to this product. Click the panel to
configure USB storage settings.
Guest Account
Displays current guest account status. Click the slider to turn guest account on or off.
Click the panel to configure guest account settings.
QoS
Displays current QoS status. Click the slider to turn QoS on or off. Click the panel to
configure priority control QoS.
Web Filtering and
Parental Controls
Displays current content filter status. Click the slider to turn web filtering and parental
controls on or off. Click the panel to configure web filtering and parental controls.
Device Settings
Displays the number of devices connected to the network. Click the panel to check each
devices status.
Advanced Settings Click the panel to configure advanced settings.