User's Manual
Table Of Contents
- User Manual
- Chapter 1 - Setup
- Chapter 2 - Settings
- Easy Admin
- Advanced Settings
- Internet
- PPPoE
- Dynamic DNS
- PPTP
- NAT
- LAN
- DHCP Lease
- Routing
- 2.4 GHz
- 5 GHz
- WPS
- AOSS
- MAC Filtering
- Multicast Control
- Guest Account
- Wireless Bridge
- Firewall
- IP Filter
- VPN Passthrough
- Port Forwarding
- DMZ
- UPnP
- Web Filtering and Parental Controls
- Disk Management
- Sharing
- WebAccess
- Media Server
- BitTorrent
- QoS
- eco Mode
- Network USB
- System
- Syslog Settings
- Reset / Reboot
- Update
- System Information
- Logs
- Packets
- Ping
- Chapter 3 - Wireless
- Chapter 4 - Utilities
- Chapter 5 - Troubleshooting
- Appendix A - Supplemental Information
- Appendix B - Tutorials
- Configuring the AirStation for Optimal Performance and Security
- Sharing a Printer
- Configuring Parental Controls
- Port Forwarding Basics
- Setting Up Port Forwarding Rules
- Configuring a USB Drive as a NAS
- Adding a Second AirStation as a Wireless Client
- Saving and Restoring Settings
- Setting Up WebAccess
- Connecting Wireless Devices Using AOSS
- Setting Up a VPN Server
- Using AirStations with 2Wire Residential Gateways
- How to Use QoS
- How to configure TCP/IP
93
Formatting the Drive
1 On the disk management page, click “Partition1”.
2 AirStation does not support ext3 or NTFS format drives. If the USB drive is in one of those formats, click [Format] to
open “Format Disk” page.
3 Select a format type and click [Execute format] to format the drive. Formatting will erase all data on the drive, so
back up any important data beforehand.
User Access
Set user access restrictions for the drive.
1 On the disk management page, click “Partition1”.