User's Manual

15
13
14
12
17
9
8
7
11
16
6
10
- 8 -
Chapter 1 Product Overview
Back Panel
6
Mode switch Switches operation mode.
7
Mode button This button turns the router on and o . The operation mode is changed
by holding down the button.
8
USB LED (Blue)
On: A USB drive is connected.
Blinking: A USB drive can be removed.
Note: When this LED is blinking, the connected USB drive cannot be used. Remove the connected USB
drive. If the LED continues to blink even after the USB drive is removed, restart the AirStation. Do
not remove the USB drive or turn o the AirStation while the USB LED is on.
9
USB Eject button To dismount a USB hard drive, hold down this button until the USB LED
 ashes (about 3 seconds). The USB drive can then be unplugged safely.
10
USB 3.0 Port Connect the USB drive.
11
USB 2.0 Port Connect the USB drive.
12
LAN Port Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps
connections.