User's Manual

19
18
Chapter 1 Product Overview
- 9 -
Bottom
18
Reset button To reset all settings, hold down this button until the Bualo LED turns red
(about 3 seconds). The power must be on for this to work.
19
Setup card slot This is the slot where the AirStation setup card is stored. The initial
settings for the username, password, SSID, and encryption type are
provided on the card for logging into the conguration interface.
13
Internet Port 10 Mbps, 100 Mbps, and 1000 Mbps connections are supported.
Note: In bridge/AP mode (router o), the Internet port becomes a
regular LAN port, for a total of 5 usable LAN ports.
14
LAN LED (Green)
On: An Ethernet device is connected.
Blinking: An Ethernet device is communicating.
15
Internet LED (Green)
On: The Internet port is connected.
Blinking: The Internet port is transmitting data.
16
Power button This button turns the power on and o.
17
DC connector Connect the included AC adapter here.