User's Manual

20
Windows Vista
To configure TCP/IP in Windows Vista, follow the procedure below.
1 Open [Control Panel].
2 Click [Network and Sharing Center].
3 Click [Manage network connections] on the left side menu.
4 Right-click on the network adapter, then click [Properties].
5 If the User Account Control screen opens, click [Yes] or [Continue].
6 Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7 To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain
DNS server address automatically].
Alternately, you can configure the settings manually. Example:
If the router’s IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
8 Click [Close].