User's Manual

3
Chapter 1 - Layout
LEDs and Connections
Top
1 Battery LED
Turns on while the unit is charging.
Glowing red: charging
Glowing green: fully charged
2 Power LED
This LED shows the status of the unit.
Glowing green: power on (If not accessed for 5 minutes, the drive goes into sleep mode and the LED turns off.)
Flashing green: The drive is being accessed.
Glowing red: Indicates that the remaining battery power level has dropped below 25%. Charging is
recommended.
Glowing orange: Indicates that this unit is ready to charge a smartphone.
3 Wireless LED
Indicates the status of the unit’s wireless.
Glowing blue: power on
Flashing blue: wireless communication in progress
4 AOSS LED
Indicates the AOSS status.
Glowing red: Connection by AOSS is complete. (After glowing for 1 minute, the LED turns off.)
Double-flashes (red): The unit is looking for another AOSS device to connect to.
Flashing red: AOSS connection error. The LED will turn off after 60 seconds.