User's Manual

7
If this unit is charged while connected wirelessly, the battery LED may turn off and charging may not be
performed in certain cases.
If this unit is charged while connected wirelessly, the internal temperature of the unit can become hot. If this
happens, to prevent unit damage due to overheating, the battery LED turns off, and charging is stopped. Once
the internal temperature of the unit drops, charging is restarted automatically.
The battery in this unit cannot be removed.
After the power is turned on, it takes about 1 minute for the unit to boot. During startup, the power can’t be
turned off.
After the unit is booted normally, hold down the power button for 3 seconds to turn off the power.
Do not shake or drop the MiniStation Air during boot. This could damage the hard drive.
Do not lean any object against MiniStation Air. It may cause the unit to malfunction.
To use files that are 4 GB or larger, keep the default NTFS format.
To use the MiniStation Air with Mac OS, reformat with FAT32. The MiniStation Air does not support HFS+.
A maximum of three devices can be connected wirelessly at the same time.
The MiniStation Air selects wireless channels automatically. There is no provision for locking communication to
a single fixed channel.
When the MiniStation Air is connected to the Internet through a wireless router, the wireless throughput to and
from your portable device drops to half.
With this configuration, only a single connected wireless device is recommended.
Press the AOSS button on the MiniStation Air to connect to your smartphone or other wireless client.
WPS is not supported.
The wireless channel cannot be changed manually.
The auto channel only is supported.
The client-side IP address of the MiniStation Air is fixed at “10.10.10.254”.