◗ Select the driver you want to install. If multiple drivers are listed, select the most recent driver version. Click the Next button. ◗ If a window opens, stating that your driver does not pass Windows Logo testing, click the Continue Anyway button. When the Wireless USB Adapter is successfully installed, click the Finish button. Restart your computer if prompted.
Step 3 Configuring Wireless Zero Configuration Service ◗ If the Wireless Zero Configuration Service is activated, Windows will scan for available wireless access points once the Wireless USB Adapter is properly installed. If Windows detects one or more access points, a networking icon appears in the taskbar. One or more wireless networks are available appears as a caption accompanying the icon.
◗ Select a network name or access point and click the Advanced button to enter an SSID network name or WEP/ WPA encryption key, if either is necessary. The 'Network Authentication' and 'Data Encryption' pull down menus will allow you to select the different kinds of wireless securities available. You have finished installing your 11 Mbps Wireless USB Adapter. See Installing Client Manager to install Client Manager on your computer.
Windows 98/ME/2000 Installation & Configuration Step 2 Installing the 11 Mbps Wireless USB Adapter ◗ Power on the notebook PC and let it boot into Windows. Plug the Wireless USB Adapter into an available USB port on your PC. Depending on the type of computer that the Wireless USB Adapter is being installed on, the USB ports can be located in different areas of the case. Check with the PC manufacturer if the USB ports can not be located.
◗ Verify that no Optional search locations are selected. Clear any checkboxes that are selected. Click the Next button to continue to the Driver Files Search Results page. ◗ Windows will display a driver you can use with the Wireless USB Adapter. Click the Next button to continue the installation process.
Installing and Connecting with Client Manager ■ Note: Running the Client Manager install on Windows XP will disable Windows XP Wireless Zero Configuration Services. ◗ The AirNavigator dialog box will open automatically. If the AirNavigator dialog box does not open automatically, select Start»Run and enter D:\Setup.exe in the Open field to open the dialog box manually. D: represents the letter assigned to the CDROM drive.
◗ Click 'Agree' on the License screen to continue installation. ◗ Click 'Next' to accept the default installation directory or hit browse and select another location. ◗ You will receive a message instructing you to wait while Client Manager installation completes. ◗ When you receive a message indicating that installation is complete, Click 'OK'. This completes Client Manager Installation.
Connecting to your Wireless LAN using Client Manager (Not using AOSS). ■ Note: If your client device and Access Point are both AOSS enabled and you intend on using AOSS to automatically configure your connection, please refer to the supplement guide 'Connecting to your Wireless LAN using AOSS (Client Manager)' included with your device.
