User Manual

17
This dialog will open. If you are not using encryption, just click Connect to connect to
your network.
If your AP uses encryption, the correct encryption
type should already be selected automatically
in the Encryption Method drop down list. Only
change this setting if necessary.
The Encryption Key fi eld is where the actual key
for the wireless network should be entered. Some
wireless networks allow you to enter multiple
keys; four separate fi elds are available for this. If
your network only uses one encryption key, then
please use the fi rst fi eld (#1) to enter your key.
The Register Profi le option will store this
wireless network in your profi les. You will then
automatically connect to this network when
inside its range. This is recommended if you plan
on using this wireless network again.
Press the Connect button once you have entered your encryption information.
Manual Co nfi g uratio n - Enc ry ptio n