User Manual AirStation Nfiniti Wireless USB Adapter WLI-UC-G450 www.buffalotech.com 35012280 ver.
Contents Chapter 1 - Product Overview.......................................... 4 Features................................................................................... 4 450 Mbps High Speed Mode.................................................... 4 System Requirements.............................................................. 5 Package Contents.................................................................... 5 Hardware Overview..................................................................
Chapter 4 - Client Manager............................................... 31 Software Overview................................................................... 31 Using Client Manager V........................................................... 31 Opening and Closing Client Manager............................................. 31 Main Screen.................................................................................... 32 Automatic Secure Setup and Advanced Setup...............................
Chapter 5 - Trouble Shooting........................................... 60 The Computer does not Recognize the Wireless Adapter....... 60 You Cannot Connect to the Network Wirelessly....................... 60 You Forgot the AP’s SSID, Encryption Key, or Password........ 60 The Link Speed is Slower than 450 Mbps............................... 61 Other Tips................................................................................. 61 Appendix . .........................................................
Chapter 1 - Product Overview Features With support for current Wireless-N, Wireless-G, and Wireless-B standards, the AirStation can transfer data to and from all standard 2.4 GHz wireless network devices. This device includes support for AOSS (AirStation One-touch Secure System) and WPS (Wi-Fi Protected Setup), making connection with other wireless devices easier.
Chapter 1 Product Overview System Requirements Computer should be IBM/PC compatible (OADG specification) with a USB 2.0 port and a CD-ROM drive. This product does not support computers equipped with dual processors (computers with two physical CPUs). Computers with Dual core CPU's are supported. Compatible OS Windows 7 (32-bit or 64-bit), Vista (32-bit), XP (32-bit) Service Pack 2 or later is required for Windows XP. Package Contents The following items are included with your AirStation.
Chapter 2 - Installation Installing Wireless Drivers Follow the instruction below to install drivers. Do not connect the AirStation to your computer yet. 1 Boot your computer and insert the AirNavigator CD. The setup wizard will launch automatically. Note: If the setup wizard doesn’t launch, double click [My Computer] > CD-ROM drive icon > [AirNavi.exe] to launch manually. 2 Click [Begin Installation]. 3 Click [AirStation Wireless LAN Adapters].
Chapter 2 Installation 4 Disable any firewalls and click [Next]. 5 Click [Install]. Note: • Check “Install Wireless Client Manager” to install Client Manager after the drivers. • Refer to page 10 to install Client Manager later. 6 WLI-UC-G450 User Manual Click [Next].
Chapter 2 Installation 7 Read the license agreement, select [Agree], then click [Next]. 8 Check “Always trust software from "BUFFALO INC.”, and click [Install]. 9 When the screen to the left is displayed, attach the AirStation to your computer. Drivers will be installed automatically.
Chapter 2 Installation 10 Click [OK]. 11 After the drivers are installed, the screen at left will be displayed. Click [Finish]. Note: If you checked the box to Install Wireless Client Manager (page 7), then the installation screen for Client Manager will be displayed after this screen. Follow the instructions on the screen to install Client Manager. Drivers are now installed.
Chapter 2 Installation Installing Utility Follow the procedure below to install “Client Manager”. 1 Boot your computer and insert the AirNavigator CD. The setup wizard will launch automatically. Note: If the setup wizard is not displayed, double-click [My Computer] > CD-ROM drive icon > [AirNavi.exe]. 2 Click [Options]. 3 Click [Advanced Installation].
Chapter 2 Installation 4 Check the box for “Install Wireless Client Manager” and click [Install]. Note: Use Client Manager V with Windows 7/Vista or Client Manager 3 with Windows XP. 5 Click [Next]. 6 Read the license agreement and select [Agree].
Chapter 2 Installation 7 Click [Next]. 8 Click [OK]. 9 Click [Back]. 10 Click “X” at the top right corner of the window to close it. Client Manager is now installed.
Chapter 3 - Connect to a Wireless Network Automatic Secure Setup (AOSS / WPS) AOSS and WPS are systems which enables you to automatically configure wireless LAN settings. Just pressing the buttons will connect wireless devices and complete security settings. Utilize this system to connect to wireless devices, computers, or game machines which support AOSS or WPS. AOSS (AirStation One-Touch Secure System) is technology developed by Buffalo Technology. WPS was created by the Wi-Fi Alliance.
Chapter 3 Connect to a Wireless Network Windows 7 or Vista (Client Manager V) If you are using Windows 7 or Vista, use the included Client Manager V software to connect wirelessly with AOSS or WPS. 1 Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [Client Manager V]. 2 3 Click [Create Profile]. The User Account Control screen is displayed. Click [Yes] or [Continue]. 4 Click the [WPS AOSS] button.
Chapter 3 Connect to a Wireless Network When “Connection has been Completed” is displayed in Client Manager V, your connection is complete. If “Set Network Location” is displayed, select “Home”, “Work”, or “Public location” depending on the environment in which the AirStation will be used. Windows XP (Client Manager 3) If you are using Windows XP, use the included Client Manager 3 software to connect wirelessly with AOSS or WPS. 1 Right-click on the icon in the system tray and select [Profile].
Chapter 3 Connect to a Wireless Network Automatic Secure Setup (WPS PIN) WPS can use a PIN generated by the Client Manager utility to easily connect to an access point that supports WPS PIN. To use WPS PIN, first install Client Manager software on your computer. See chapter 2 for instructions on installing Buffalo Client Manager software. Windows 7 or Vista (Client Manager V) The procedure for connecting to an access point with a WPS PIN is described below.
Chapter 3 Connect to a Wireless Network 4 Click [Advanced Setup]. 5 Click [WPS-PIN].
Chapter 3 Connect to a Wireless Network 6 Carefully copy the PIN to a piece of paper, then click [Next]. 7 Select the access point to connect to, then click [Next]. This screen will be displayed.
Chapter 3 Connect to a Wireless Network 8 Use a PC with a wired Ethernet connection to log in to the access point’s management utility. Note: If the access point you are trying to connect is a Buffalo AirStation, click Wireless Config > WPS from the home page of the configuration interface. The screen to enter the PIN code will be displayed. 9 Navigate to the WPS PIN configuration screen, then enter the PIN that you write down in step 6.
Chapter 3 Connect to a Wireless Network Windows XP (Client Manager 3) If you are using Windows XP, use your Client Manager 3 software to connect wirelessly with WPS PIN. 1 Right click on the type]. icon in the system tray and select [Easy Connection] > [WPS PIN Code 2 Carefully copy the PIN to a piece of paper, then click [Next]. 3 Select the access point to connect to, then click [Next].
Chapter 3 Connect to a Wireless Network This screen will be displayed. 4 Use a PC with a wired Ethernet connection to log in to the access point’s management utility. Note: If the access point you are trying to connect is a Buffalo AirStation, click Wireless Config > WPS from the home page of the configuration interface. The screen to enter the PIN code will be displayed. 5 Navigate to the WPS PIN configuration screen, then enter the PIN that you write down in step 2.
Chapter 3 Connect to a Wireless Network Manual Setup (Client Manager) You may also connect to an access point manually, without using AOSS or WPS. The procedure varies depending on the version of Windows used. First, install Client Manager from the included CD. See chapter 2 for instructions on installing Client Manager. Windows 7 or Vista (Client Manager V) With Windows 7 or Vista, use Client Manager V to connect wirelessly.
Chapter 3 Connect to a Wireless Network 4 Click [Advanced Setup]. 5 WLI-UC-G450 User Manual Click [Connect Manually].
Chapter 3 Connect to a Wireless Network 6 Select your access point, then click [Next]. 7 Enter your Network Type, Security Type, Encryption Method, and Encryption Key (passphrase), then click [Connect]. When “Connection has been completed” is displayed, your connection is complete. If “Set Network Location” is displayed, select “Home”, “Work”, or “Public location”, depending on the environment in which the AirStation will be used.
Chapter 3 Connect to a Wireless Network Windows XP (Client Manager 3) Client Manager 3 is a wireless connection utility for Windows XP. 1 Right-click on the icon in the system tray, and select [Scan]. 2 Select the access point to connect to and click [Next]. 3 Choose your Encryption Method and enter an Encryption Key. Click [Connect]. Follow the instructions on the screen to connect.
Chapter 3 Connect to a Wireless Network Manual Setup (Windows Utility) You can connect to an access point without installing or using Client Manager. Windows includes a built-in wireless utility. The procedure varies depending on the version of Windows used. Windows 7 (WLAN AutoConfig) With Windows 7, use WLAN AutoConfig to connect to the AirStation. 1 Click on the network icon in the system tray. 2 Select the target AirStation’s name and click [Connect].
Chapter 3 Connect to a Wireless Network Windows Vista (WLAN AutoConfig) You can use WLAN AutoConfig to connect to a wireless access point: 1 Right-click on the wireless network icon 2 Click [Connect to a network]. 3 WLI-UC-G450 User Manual in the system tray. Select your wireless network and click [Connect].
Chapter 3 Connect to a Wireless Network If the screen below is displayed, click [I want to enter the network key or passphrase instead]. Go to step 4.
Chapter 3 Connect to a Wireless Network 4 Enter the encryption key and click [Connect]. Step through the wizard to complete configuration. If the “Set Network Location” screen is displayed, select “Home”, “Work”, or “Public location“ depending where you’re using the AirStation.
Chapter 3 Connect to a Wireless Network Windows XP (Wireless Zero Configuration) Windows XP includes a built-in utility to connect to your wireless Access Point. Note: If Client Manager 3 is installed on your computer, then Wireless Zero Configuration is disabled. Uninstall Client Manager 3 to use Wireless Zero Configuration, or just use Client Manager 3 to connect to the AirStation. 1 Right-click on the wireless network icon 2 Click [View Available Wireless Networks]. in the system tray.
Chapter 4 - Client Manager Software Overview Client Manager is utility software used to connect to an access point on the network or to verify the connection between an access point and your computer. It is included with this device. Note: Two versions of Client Manager are included on your AirNavigator CD. Client Manager V supports Windows 7 and Vista. Client Manager 3 supports Windows XP. The installation program will install the correct version for your operating system.
Chapter 4 Client Manager Main Screen The Main screen displays the current connection status. You can perform the following operations from this screen. Parameter Meaning Profile Displays information about the current connection points. If you have multiple connection points, you can switch among them. Transmission Speed Displays the current connection speed. Signal Strength Displays the current signal strength.
Chapter 4 Client Manager Automatic Secure Setup and Advanced Setup There are two ways to connect to an access point: automatic or manual. In the following wizard, automatic setup will be reffered to as “AOSS/WPS” and manual setup will be referred to as “Advanced Setup”. Parameter Meaning Wireless Adapter Displays names of currently used wireless devices. Automatic Secure Setup Clicking this will search for an AOSS or WPS compatable access point to connect to automatically.
Chapter 4 Client Manager SSID / WPS-PIN selection This screen lets you select whether to connect to an access point by specifying the SSID or by enterring a WPS PIN. Parameter Meaning Connect Manually Specify SSID of an access point and configure connection settings. Click here to display the Searching Wireless Access Points screen (next page). Connect with WPS-PIN Click this to connect to a wireless access point by entering its WPS PIN.
Chapter 4 Client Manager Searching Wireless Access Points The screen to list available wireless access points in your area. You can select an access point and enter network information manually to connect. Parameter Meaning Network Name (SSID) Displays the SSID of each available access point. Security Displays whether or not the access point uses encryption. Channel Displays the wireless channel used by an access point. Strength Displays the signal strength of an access point.
Chapter 4 Client Manager Wireless Network Information Configure wireless connection settings. Parameter Meaning Network Type Select a type of connection. Network Name (SSID) Enter the SSID of an access point. Security Type Select the security type of the selected access point. Encryption Method Select the encryption method of the selected access point. Encryption Key or Passphrase Enter the encryption key for the access point.
Chapter 4 Client Manager WPS-PBC / AOSS selection You may automatically connect to an access point by just pushing or clicking two buttons with WPS or AOSS. Parameter Meaning Automatic Secure Setup WPS-PBC method Click this to automatically connect to an access point that supports WPS. Automatic Secure Setup AOSS method Click this to automatically connect to an access point that supports AOSS.
Chapter 4 Client Manager Wireless Status This screen displays the current connection status. Parameter Meaning Adapter Displays the name of the current wireless client. Execute wireless LAN diagnostics Opens the Wireless LAN Diagnoses wizard (page 40). Profile Name Displays the current profile name. Status Displays the current transmission status. Network Mode Displays the current network mode. Transmission Speed Displays the current transmission speed.
Chapter 4 Client Manager Parameter Meaning Security Displays whether encryption is currently enabled or not. Authentication Type Displays the type of authentication currently used. Encryption Type Displays the type of encryption currently used. Signal Strength Displays the current signal strength. IP Address Displays the IP address assigned to your wireless client. Subnet Mask Displays the subnet mask assigned to your wireless client. Default Gateway Displays the default gateway address.
Chapter 4 Client Manager Wireless LAN Diagnostic On the Wireless LAN Diagnostic screen, you can check signal strength and quality. Parameter Meaning Adapter Displays the name of the wireless client currently in use. Connection status Displays signal strength (dBm), link rate (Mbps), and signal quality (%) in 1 minute intervals. There are the following restrictions. • Some items may not be displayed depending on your wireless device.
Chapter 4 Client Manager Profile List Create a new profile or edit an existing profile. Parameter Meaning Adapter Displays the name of the wireless client which is currently used. New Create a new profile. Click this to display the Automatic Secure Setup and Advanced Setup screen (page 33). Edit Edit the selected profile. Click this to display the Extended properties (Wireless) screen (page 42). Delete Delete the selected profile. Down Lower the priority of the selected profile.
Chapter 4 Client Manager Wireless Properties Current wireless settings. Parameter Meaning Connection Displays the current profile name. SSID Displays the SSID of the current connection. Security Type Displays the security type you are using for the current connection. Encryption Type Displays the encryption type you are using for the current connection. Security key or Pass phrase Displays the security key or pass phrase if “Display password visible“ is checked.
Chapter 4 Client Manager Network Properties By default, your client’s IP address is set automatically by DHCP. You may configure it manually from this screen. Parameter Meaning Do not change IP Address settings of this Profile Select to keep your current TCP/IP network setting without any changes. This is the recommended setting. Use the following settings Select this option to change your TCP/IP network settings. For expert users only.
Chapter 4 Client Manager Browser Properties Configure Internet Explorer settings for wireless connections. Parameter Meaning Do not change the browser settings Select to keep the current Internet Explorer settings. of this Profile Use the following settings Select this option to configure the Internet Explorer Home Page and Proxy Server settings while connected wirelessly.
Chapter 4 Client Manager Printer Properties Configure the printer used while connected to an access point wirelessly. Parameter Meaning Do not change the printer settings of Select to keep your current printer settings. this Profile Use the following settings WLI-UC-G450 User Manual Select to use a different default printer while connected wirelessly.
Chapter 4 Client Manager Using Client Manager 3 • When you install Client Manager, it will be added to your Startup folder and will automatically start with Windows. To launch Client Manager manually, click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [ClientManager3]. • Right-click on the Client Manager icon in the system tray and click [Exit] to close Client Manager.
Chapter 4 Client Manager Status The Status screen displays the current connection status. Parameter Meaning Profile Current connection profile name. SSID SSID of the currently connected access point. Adapter Name Name of the wireless client currently in use. Network Type Current network mode. Transmission Speed Current transmission speed. Channel Current wireless channel. Security Displays whether security is currently enabled or not. IP Address The IP address assigned to this unit.
Chapter 4 Client Manager Parameter Meaning MAC Address MAC address of this unit. Duration Elapsed duration of the current wireless connection. Signal Strength Current signal strength. Reconnect Click to reconnect the most recent connection.
Chapter 4 Client Manager Scan Scan and display nearby access points. Parameter Meaning SSID SSID of access point. Wireless mode Wireless type (such as 11a and 11g) of the access point. Channel Wireless channel of the access point. Strength Reception strength of each access point. Encryption Displays if security is used by the access point. Connect Click this to display the Connect screen (page 50). Refresh Click here to search for available access points again.
Chapter 4 Client Manager Connect Configure connection to an access point. Parameter Meaning Encryption Method Type of encryption used by the access point. Encryption Key Enter the access point’s encryption key (pass phrase). Register Profile Check to register this connection as a profile.
Chapter 4 Client Manager Profiles Connect to an access point or edit a profile. Parameter Meaning Connect Selecting a profile and clicking this button will connect to an access point using a stored profile. Add Click this to add a new profile. It will display the Profiles Information screen (next page). Edit Click this to edit or delete information in a profile. WPS AOSS Click this button to have AOSS/WPS (PBC) automatically set security.
Chapter 4 Client Manager Profile Information (Basic) Configure your profile settings. Parameter Meaning Display Icon Select an icon to display on the profile from the list. Select Profile Connection may be wireless or wired (Ethernet). For use with the AirStation, select Wireless. Profile Name Enter a name for the profile. Network Type Select infrastructure mode to connect to an access point (recommended), or ad-hoc mode to connect directly to another wireless client.
Chapter 4 Client Manager Parameter Meaning Encryption Method Select the encryption method used by the wireless access point. Transmission Key If WEP is used for the Encryption Method, 4 pass phrases may be entered. Use of the first (at least) is recommended. Encryption Key Enter the encryption key (pass phrase) for the access point. AP is set to exclusive connection Check if the access point’s SSID is not broadcast.
Chapter 4 Client Manager Profile Information (Network) The profile’s IP address and subnet mask may be manually assigned. Parameter Meaning Do not change IP Address settings of this Profile Check to keep using current TCP/IP network settings. Automatically acquire the IP Address Check to automatically acquire the IP address from a DHCP server when connecting wirelessly.
Chapter 4 Client Manager Profile Information (Browser) Configure your Internet Explorer settings when connecting wirelessly. Parameter Meaning Do not change the browser settings of this Profile Check to use current Internet Explorer settings when connecting wirelessly. Uncheck to use any of the settings below. Address to use as Home Page To use a different home page in Internet Explorer when connecting wirelessly, enter it here.
Chapter 4 Client Manager Profile Information (Printers) Configure the printer that your computer uses when connected wirelessly. Parameter Meaning Do not change the printer settings of this Profile Select this option to use a different printer when connecting wirelessly.
Chapter 4 Client Manager System Tray Menu Right-click on the Client Manager icon in the system tray to display the following choices. Parameter Meaning Status Displays the Status screen (page 47). Scan Displays the Scan screen (page 49). Profile Displays the Profiles screen (page 51). Easy Connection Runs Automatic Secure Setup, using one of the following connection methods: AOSS, WPS(PBC), or WPS(PIN). Help Displays Client Manager Help. Option Displays the Options menu screen (page 58).
Chapter 4 Client Manager Option Menu Configure Client Manager options. Parameter Meaning Mode Switch between Client Manager’s operating modes. If you select “Business Mode”, the button to configure 802.1x authentication appears on the Profiles screen (Page 51). “Home Mode” is recommended. Lock If you click this, you will not be able to add new profiles or edit existing profiles. To lock or unlock, enter the password (8 - 63 characters).
Chapter 4 Client Manager Parameter Meaning Initialize profile Click this to initialize profile information. Before initializing profile information, unlock the unit. Use the following network adapter Select a network adaptor to use in Client Manager. “Wireless Adapter Auto-select“ is recommended for most users. Automatically connect to the profile with highest priority If checked, it will attempt to connect to the profile with highest priority as assigned on the Profile screen (page 51).
Chapter 5 - Trouble Shooting The Computer does not Recognize the Wireless Adapter. • Make sure that the AirStation is connected to a USB port on your computer. • If your computer has multiple USB ports, connect to a different USB port. • Refer to chapter 2 to reinstall drivers for this unit. You Cannot Connect to the Network Wirelessly. • Refer to chapter 3 to connect this unit to an access point wirelessly. • Configure the same SSID, encryption method, and encryption key for each wireless device.
Chapter 5 Trouble Shooting The Link Speed is Slower than 450 Mbps. The default setting for 450 Mbps mode on the AirStation is “off”. Refer to "450 Mbps Mode settings" on page 64 to turn on 450 Mbps mode. Other Tips Issue: When using the Windows wireless connection manager, I cannot connect to my wireless router. I receive a "Cannot configure wireless network" error message when scanning for available wireless networks.
Chapter 5 Trouble Shooting Issue: What can I do if my wireless connection drops randomly or seems slow? Answer: There are many environmental factors that may affect this behavior. First, ensure the issue is not range related by locating the wireless router and the client in closer proximity and check whether the connection drops continue. In some cases, interference from other wireless networks or sources such as 2.4 GHz wireless phones may impact performance.
Chapter 5 Trouble Shooting Issue: Where can I download the latest drivers, firmware and instructions for my Buffalo wireless products? Answer: The latest drivers and firmware with installation instructions are available online at www.buffalotech.
Appendix 450 Mbps Mode Settings By default, the AirStation’s 450 Mbps mode is disabled. Use the following proceedure to enable it if desired. 1. Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [AirStation Bandwidth 20 or 40 MHz Select Tool] and launch the utility software. If the User Account Control screen is displayed, click [Yes] or [Continue]. 2. When the message “Now start the setup wizard of Bandwidth Select Tool” is displayed, click [Next]. 3. Click [Next]. 4.
Appendix Specifications Wireless LAN Interface Standard Compliance IEEE802.11b / IEEE802.11g / IEEE802.11n Transmission Method Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO Frequency Range 2,412 - 2,462 MHz (Channels 1 - 11) Transmission Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n 20 MHz BW (Long GI) 175.5, 156, 117, 78, 58.5, 39, 19.5 Mbps (3 stream) 130, 117, 104, 78, 52, 39, 26, 13 Mbps (2 stream) 65, 58.5, 52, 39, 26, 19.5, 13, 6.
Appendix Dismounting If you use Windows 7, Vista, or XP, just unplug the AirStation. Uninstalling the Software To uninstall the software, follow the procedure described below. 1. Insert AirNavigator CD. When you insert CD, AirNavigator Setup Wizard will launch automatically. If AirNavigator Setup Wizard is not displayed, double-click My Computer icon > CD-ROM drive icon > [AirNavi.exe]. 2. Click [Options]. 3. Click [Uninstall software]. 4.
Appendix TCP/IP Settings in Windows Windows 7 To configure TCP/IP in Windows 7, follow the procedure below. 1 Click [Start] > [Control Panel] > [Network and Internet]. 2 Click [Network and Sharing Center]. 3 Click [Change Adapter Settings] on the left side menu. 4 Right-click on [Local Area Connection], then click [Properties]. 5 If the message “Windows needs your permission to continue” appears, click [Continue]. 6 Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
Appendix Windows Vista To configure TCP/IP in Windows Vista, follow the procedure below. 1 Click [Start] > [Settings] > [Control Panel]. 2 Double-click [Network and Sharing Center]. 3 Click [Manage network connections] on the left side menu. 4 Right-click on [Local Area Connection], then click [Properties]. 5 When the message [Windows needs your permission to continue], click [Continue]. 6 Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].
Appendix Windows XP To configure TCP/IP in Windows XP, follow the procedure below. 1 Click [Start] > [Settings] > [Control Panel]. 2 Double-click [Network]. 3 Right-click on [Local Area Connection], then click [Properties]. 4 Select [Internet Protocol (TCP/IP)], then click [Properties]. 5 To have DHCP set your IP address settings automatically, check [Obtain an IP address automatically] and [Obtain DNS server address automatically].
Appendix Compliance Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix The USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, it should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements.
Appendix Europe - EU Declaration of Conformity: This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC.
Appendix Česky [Czech] Buffalo Technology Inc. tímto prohlašuje, že tento AirStation WLI-UC-G450 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Buffalo Technology Inc. erklærer herved, at følgende udstyr AirStation WLI-UC-G450 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt Buffalo Technology Inc.
Appendix Lietuvių [Lithuanian] Šiuo Buffalo Technology Inc. deklaruoja, kad šis AirStation WLI-UC-G450 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart Buffalo Technology Inc. dat het toestel AirStation WLI-UC-G450 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, Buffalo Technology Inc.
Appendix 根據 NCC 低功率電波輻射性電機管制辦法： 第十二條： 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加 大功率或變更原設計之特性及功能。 第十四條： 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用， 並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率 射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 기종별 B 급 기기 ( 가정용 정보통신기기 ) WLI-UC-G450 User Manual 사용자안내문 이 기기는 가정용 (B 급 ) 전자파적합기기로서 주 로 가정에서 사용하는 것을 목적으로 하며 , 모든 지역에서 사용할 수 있습니다 .
Appendix Environmental Information • The equipment that you have purchased has required the extraction and use of natural resources for its production. • The equipment may contain hazardous substances that could impact health and the environment. • In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems.
Appendix Warranty Information Buffalo Technology (Buffalo Inc.) products come with a two-year limited warranty from the date of purchase. Buffalo Technology (Buffalo Inc.) warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (Buffalo Inc.) installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technology/(Buffalo Inc.
