Operation Manual

Convert MAC Address
Add dynamic MAC addresses to static MAC filtering table to filter them in static MAC filtering.
Add to Static MAC
Filtering Table from
Dynamic MAC Address
Select a port number to display the dynamic MAC addresses that was learned
from the port. Select MAC addresses to add to the static MAC filtering table and
click [Add].
Static MAC Address
Register the static MAC address to the MAC address table. The device with a registered MAC address can
communicate only when it is connected to the specified port. You can confirm the status of static MAC addresses
registration in [Management] - [MAC Address Table].
MAC Address
Enter a MAC address. Up to 256 MAC addresses can be registered to the switch in
total.
Port Specify the port number to register the static MAC address.
Static MAC Address Displays the registered static MAC addresses.
Notes:
• This function is not compatible with multicast MAC addresses, VRRP MAC addresses (00:00:5E:00:01:XX), and
broadcast MAC addresses.
• The registered device cannot communicate when it is not connected to the specified port.
MAC Address Aging
Configure MAC address aging time. MAC address aging time is the time between the last reference of the MAC
address and deleting MAC address.
Aging Time Enter the aging time.
31
Chapter 2 Settings