Operation Manual

PoE
This functionality is for PoE-compatible switches only.
Status
Displays the PoE status.
Power Displays the maximum power, power being used, and available power.
PoE
Displays if PoE is enabled (on) or disabled (off).
Notes:
• If you connect a PoE device to the switch while available power (shown to the
right of "Available") is 16000 mW (16 W) or lower, the switch will not supply PoE
power to the device.
• The maximum power of BS-GS20P series is 180000 mW (180 W).
Status Displays the power feeding status.
Power Class Displays the connected device’s class.
Priority Displays the priority of each port.
Supplied Power Displays the supplied power of each port.
Current Displays the supplied current of each port.
36
Chapter 2 Settings