Setup guide

ManualsBrandsBuffalo ManualsComputer equipmentHS-DTGL/R5

Unpacking and Setup

This section provides unpacking and setup information for TeraStation.

Open the shipping carton of TeraStation and carefully unpack its contents. The

carton should contain the following items:

Main unit (TeraStation) 1

Ethernet Cable 1

Power Cord 1

TeraNavigator Installation CD 1

Quick Setup Guide (this user’s guide) 1

Warranty card 1

If any items are missing or damaged, please contact the reseller or retailer from

which the product was purchased.

Quick Setup Guide

TeraStation

HD-HTGL/R5 Series

www.buffalo-technology.com

PY00-30050-DM20-02 2-01

Summary of content (8 pages)

PAGE 1
Quick Setup Guide TeraStation HD-HTGL/R5 Series Unpacking and Setup This section provides unpacking and setup information for TeraStation. Open the shipping carton of TeraStation and carefully unpack its contents.
PAGE 2
TeraNavigator Setup The setup of Link Navigator is performed using the following steps: Insert the TeraNavigator CD into the PC’s CDROM drive. Depending on the PC’s conﬁguration, the EasySetup program may launch. If it does not automatically launch, manually launch it by pressing the ‘Start’ menu and selecting the ‘Run...’ option. When the ‘Run’ dialog opens, type x:\easysetup.exe (where X is the drive letter of the CD-ROM drive). Press ‘OK’ to continue. Link Navigator is now running.
PAGE 3
TeraNavigator Setup Plug TeraStation’s power cord into a power socket. Then, connect the included Ethernet Cable into the Ethernet port on the back of TeraStation. Switch the power switch on the rear panel to the ‘ON’ position. Press the power button on the front of the TeraStation to turn it on.
PAGE 4
Follow these setup instructions. ◗ Choose “Initial setup” from setup mode selection. ◗ Disk drive structure There are four methods to conﬁgure disk drive structure. Select preferred method. Normal mode Select this mode to use four 250GB hard drives individually. Spanning mode Select this mode to combine four 250GB hard drives as a one 1TB hard drive. Mirroring Mode RAID 1 (250GB×2) Two pairs are created from the 4 drives as two separate 250 GB shares.
PAGE 5
Operate following steps referring setup instruction. ◗ The factory default settings are shown as below. Hard drive structure mode: RAID5 mode (750GB) IP address: Obtained from DHCP server TeraStation name: HD-HTGL*** (*** depends on unit) Administrator password: password Click “Finish” button when “Setup complete” is displayed. Network drive icon appears in “My Computer”. Install other utilities from TeraNavigator CD.
PAGE 6
Technical Speciﬁcations LAN Standards: IEEE802.3ab 1000BASE-T; IEEE 802.3u 100BASE-TX; IEEE 802.3 10BASE-T Transmission Types: 1000BASE-T 8B1Q4+PAM5; 100Mbps/10 Mbps; 100BASE-TX 4B/5B, MLT-3; 10BASE-T Manchester Coding Access Media: CSMA/CD Media Interface: RJ-45 USB Standard: USB 2.0 Hi-Speed (HS) Full-Speed (FS) Low-Speed (LS) USB Connector: USB A Connector (2) Data Transmission Speed: Max: 480 Mbps (HS Mode) Max: 12 Mbps (FS Mode) Electric Current: 5.
PAGE 7
Technical Support CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Technical Support Buffalo Technology offers Technical Support between the hours of 9am-6pm (GMT) Monday to Thursday and 9am-4:30pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following information: ◗ Online Help Available on the enclosed AirNavigator CD. ◗ Web www.
PAGE 8
BUFFALO WARRANTY STATEMENT Buffalo products come with a 2-year limited warranty from the date of purchase. Buffalo Technology warrants in good operating condition for the warranty period. This warranty does not include non-Buffalo Technology installed components.