Operation Manual

Adjusting Top Plate Tension

Use the Allen key supplied to adjust the tension of the top plate.

Turn clockwise to tighten, anti-clockwise to loosen.

BUFFALO recommend the appliance is disconnected from the power supply and allowed to cool before any

adjustments are made.

Using the Timer

The digital timer with audible alarm can be set from 1 second to 15 minutes

START/STOP: Press START/STOP to start timer, press again to stop. The timer will provide an audible

alarm after the set time. The alarm will beep 10 times and the display will continue to flash until timer is

reset (press the START/STOP button)

UP: Press UP to add extra time

DOWN: Press DOWN to reduce time

PROGRAM:There are a total of 6 programmable timer settings. The default factory program settings are

given below

To change the length of a program select the program you want to change by scrolling using the

PROGRAM button. Adjust the program time by using the UP and DOWN buttons. Press START/STOP

to commence the count down. The new program time will be automatically stored

Note: It is possible to tighten the plate so that it sits in the open position (if required).

The timer provides an audible alarm after the set time expires. It provides no electrical

control over the unit

If the unit is left without power for more than 24hrs the timer settings will revert to the

factory defaults

DOWNPROGRAM

START/STOP