Manual

127
Information Code Description Corrective Action
I54 A backup job has failed.
Make sure that the backup job is
configured correctly. Make sure that the
NAS is on and not in standby mode. If
the backup job still fails, check the status
of the network and backup source and
destination.
Amber (Not Blinking)
When the power LED glows a steady amber, a new firmware version is available. Update the firmware to the newest
version.
Default Settings
Administrator's Name admin
Password password
Shared Folders
"share" (for both Windows and Mac computers). The recycle bin is enabled
on "share" by default.
DHCP Client
Normally, the LinkStation will get its IP address automatically from a DHCP
server on the network. If no DHCP server is available, then an IP address will
be assigned as follows:
IP address: 169.254.xxx.xxx (xxx is assigned randomly when booting the
LinkStation.)
Subnet mask: 255.255.0.0
Registered Groups
"hdusers", "admin", and "guest" are default groups and cannot be edited or
deleted.
Microsoft Network Group Setting WORKGROUP
Ethernet Frame Size 1500 bytes (not including 14 bytes of header and 4 bytes of FCS)
SMB2 Disabled
AFP Disabled
FTP Disabled
NTP Enabled
Print Server Disabled
WebAccess Disabled
Time Machine Disabled
DLNA Server Disabled
iTunes Server Enabled
BitTorrent Disabled
Function Button Initialization Restore factory default settings
Update Notification Enabled
RAID Mode RAID 1 (LS220D only)
Specifications
Check the Buffalo website for the latest product information and specifications.