Manual

this period, but the array will remain fully usable. "RAID Array x Resyncing" will be shown in NAS Navigator2

during the resync. If you uncheck "Resync after creating the RAID array", the resync will be skipped. If the

LinkStation is rebooted during the resyncing process, the resync will begin again from the beginning.

9 Step through the wizard to create the array.

After changing the RAID mode, create a shared folder.

RMM (RAID Mode Manager)

With RMM, you can create or expand a RAID array without erasing the data on the drives.

Hard drives that aren't in a RAID array show "Normal". You must have at least two drives available in JBOD (not in a

RAID array) to build the RAID 1 array with RMM.

1 In Advanced Settings, click Drives.

2 Click to the right of "RAID".

3 Choose a RAID array.

4 Set the RAID mode to "RAID 1".