Manual

90
2 Move the Direct Copy switch to the position to enable Direct Copy, then tap Apply.
The data from the USB drive will be copied to the target folder. You may change the target folder from the
drop-down list if desired.
Starting Direct Copy
1 Connect the USB device. When it mounts (about 10 seconds), the function LED will light up.
Notes:
• Devices that don't trigger the function LED to light up are not supported.
• When you connect PTP devices, the function LED may not light up. In such case, disconnect the PTP device
from the LinkStation once, then reconnect it.
2 You now have 60 seconds to press the function button once. If you do, the function LED will flash as all the files
on the USB device are copied to the Direct Copy folder of the LinkStation.
Notes:
• While the function LED is flashing, press the function button once to cancel Direct Copy.
• For digital cameras that are not in the USB mass storage class, all files from the digital camera are copied.
3 When the copy operation is finished, the access LED of the USB device will stop flashing. Hold down the
function button for 8 seconds. The function LED will flash as all external drives are dismounted, which will take
about 30 seconds. When the dismount is finished, the function LED will stop flashing and glow steadily. You
now have 60 seconds to unplug any USB drives safely.