User Manual

Select “Start when added” to start downloading immediately after clicking Upload.
4 The download will start.
To cancel downloading, click , then Remove. Click to pause the download. Click or to resume.
Connecting a Printer
You can connect a printer to the USB port on the LinkStation.
Notes:
• Only one USB printer can be connected to the LinkStation.
• Bidirectional communication is not supported i.e., remaining ink quantities and other printer status information is
not supported.
• Don’t disable the SMB protocol while the print server is enabled. If you do, you will need to enable SMB again and
reconfigure the print server from scratch.
Setting Up a Printer from a Computer
1 Connect a printer to the LinkStation’s USB port, then turn the printer on.
2 From Advanced Settings, click Services.
3 Move the print server switch to the position to enable the print server.
4 Refer to the manual supplied with the printer and install the printer drivers.
5 Launch NAS Navigator2. Double-click your LinkStation’s icon.
6 Double-click the icon of the connected printer (shared name is displayed).
100
Chapter 7 Multimedia