User Manual

3 Settings will be displayed.

Notes:

• The first time you go through setup, you’ll be given a chance to change the default password, correct the time

zone settings, and select the RAID mode (models with 2+ drives only). Step though the wizard to change these

settings.

• If you tap any buttons, you will need to enter a username and password.

• Tap Desktop to show Advanced Settings. This screen gives the full array of settings that could be changed from a

computer, but is not optimized for mobile devices.

Settings That Can Be Changed from Your Mobile Device

You can change the following settings from your mobile device:

• Create users, change usernames and passwords.

• Create shared folders.

• Configure WebAccess settings to remotely access your LinkStation.

• Configure your LinkStation to use with DLNA-compatible devices on the LAN.

• Configure and dismount USB devices connected to your LinkStation, including Direct Copy options and print

server settings.

• Update the firmware.

• Recover the RAID array if a drive fails (models with 2+ drives only).

Chapter 2 Configuration