User Manual

3 Click the array to delete. If the “RAID Mode” is blank, the array is already in JBOD. Proceed to step 7.

4 Click Delete RAID Array.

5 The “Confirm Operation” screen will open. Enter the confirmation number, then click OK.

6 Click OK.

7 Choose a RAID array.

8 Select a RAID mode and the drives to be used, then click Create RAID Array.

Note: Normally, after a RAID array is created, it is “resynced”, which optimizes the array, making it more stable.

The resyncing process takes about 1 hour per terabyte of space in the array. File transfers will be slower during

this period, but the array will remain fully usable. The I17 message will be displayed in NAS Navigator2 during

Chapter 4 Storage Management