User Manual

4 Set the RAID mode to “RAID 1”.

5 Select the “Add a disk to RAID array with RMM. Your data will be preserved.” checkbox.

6 Select the drive whose data will be saved from the drop-down list.

7 Select the drive to add to the RAID array.

8 Click Create RAID Array.

9 The “Confirm Operation” screen will open. Enter the confirmation number, then click OK.

10 Click OK when completed.

RAID Scanning

A RAID scan checks your RAID array for bad sectors and if it finds any, it automatically repairs them. Only RAID 1

arrays are supported. For best result, run a RAID scan regularly.

1 From Advanced Settings, click Drives.

2 Move the RAID scanning switch to the position to enable RAID scanning.

3 Click to the right of “RAID Scanning”.

Chapter 4 Storage Management