User Manual

For JBOD
Navigate to Drives > Drives in Advanced Settings. Format the new drive and create a shared folder before use.
Rebuilding the RAID Array from a Mobile Device
You can also initiate the RAID rebuild from your mobile device.
1 Turn the LinkStation off and remove all cables.
2 Squeeze the left side of the front panel and swing it open.
3 Push the failed drive’s cartridge up and remove it from the LinkStation.
4 Remove the drive from the cartridge.
5 Install a new drive (sold separately) into the cartridge.
6 Replace the four screws.
7 Insert the new drive in the empty slot.
8 Close the front panel.
9 Connect all cables, then turn on the LinkStation.
10 Open the SmartPhone Navigator app on your mobile device and log in to Settings.
11 From Settings, tap the blinking yellow information icon.
12 Tap Recover RAID Array, then tap Recover RAID Array again.
13 Click Yes.
14 The “Confirm Operation” screen will open. Enter the confirmation number and tap OK.
The array will begin to rebuild.
59
Chapter 4 Storage Management