User Manual

Configuring a Backup Job

You can configure backup jobs by using another shared folder on the Buffalo NAS device or a USB drive connected

to the LinkStation as a destination. You can also back up to a Buffalo NAS device on another network as long as the

two networks are connected by a VPN or the route is configured properly.

1 From Advanced Settings, click Backup.

2 Click to the right of “Backup”.

3 If you had configured a backup password for the backup source folder on another Buffalo NAS device or the

backup destination folder, click Set. If you hadn’t, skip to step 5.

4 Enter the configured backup password and click OK.

Chapter 6 Backup