User's Manual

130
Chapter 11 Appendix
Code Description Corrective Action
I52
A new firmware version has been released.
Update the firmware by referring to the
“Updating the Firmware” section in chapter
8.
I54
The backup job failed.
Make sure that the backup job is
configured correctly. Make sure that the
backup target NAS device is on and not in
standby mode. If the backup job still fails,
check the status of the network, as well as
the backup source and destination.
Amber (Glowing)
When the power LED glows a steady amber, a new firmware version is available. Update the firmware to the newest
version.
Default Settings
Administrator’s Name admin
Password password
Shared Folders
“share”
*
and “info” for both Windows and Mac computers.
*The recycle bin is enabled by default.
IP Address
The LinkStation will get its IP address automatically from a DHCP server
on the network. If no DHCP server is available, then an IP address will be
assigned as follows:
IP Address: 169.254.xxx.xxx (“xxx” is a number randomly assigned when
booting the LinkStation.)
Subnet Mask: 255.255.0.0
Registered Groups
“hdusers”, “admin”, and “guest”
You cannot edit or delete these default groups.
Microsoft Network Group Settings WORKGROUP
Ethernet Frame Size 1500 bytes
SMB
Enabled
SMB Protocol Switch between SMB2 and SMB1 automatically
Exclude Mac OS
temp files from
recycle bin
Yes
AFP Disabled
FTP Disabled
WebAccess Disabled
RAID Scanning Disabled
DLNA Server Disabled
iTunes Server Enabled
Print Server Disabled
BitTorrent Disabled
Time Machine Disabled
Direct Copy Disabled
NTP Enabled