User manual

Using your LinkStation
LinkStation User Manual 51
Notes: • To use the LinkStation with Jumbo Frame, your router/switch/hub must support Jumbo
Frame.
• To use Jumbo Frame (4102/7422/9694 bytes), your computer’s NICs and all switches, hubs,
and routers on the transmission route need to support Jumbo Frame. If any device on the
route does not support Jumbo Frame, use standard transmission (1518 bytes) instead.
• If you are using Jumbo Frame and back up data from a LinkStation/TeraStation to another
LinkStation/TeraStation, set the Ethernet frame sizes of the LinkStations/TeraStations to the
same settings (or the closest available). If the Ethernet frame sizes are signicantly dierent,
the backup job may fail. If you have problems with backup jobs, select the default frame
size (1518 bytes).
Connec tion Transm issio n
Transmit
Jumbo Frame
(4102/7422/9694)
LinkStation
Jum b o Fra m e
(41 0 2/742 2 /969 4 )
Jum b o Fra m e
supported
Jum b o Fra m e
supported
LinkStation
Jum b o Fra m e
(41 0 2/742 2 /969 4 )
Jum b o Fra m e
Supported
Jum b o Fra m e
not supported
LinkStation
Jum b o Fra m e
(41 0 2/742 2 /969 4 )
Jum b o Fra m e
not supported
Jum b o Fra m e
not supported
LinkStation
Jum b o Fra m e
(41 0 2/742 2 /969 4 )
Jum b o Fra m e
not supported
Jum b o Fra m e
supported
Transmit
normally(1518)
Transmit
normally(1518)
No transmission