User manual
ROUTER
POWER
INTERNET
LAN
１
２
３
４
ON
OFF
AUTO
AirStation
1) connect
2) connect the power supply
LAN cable
power outlet
PC
1) connect
power outlet
modem
ON
computer
WHR-HP-GN / WHR-HP-G300N User Manual 18
Chapter 3 Installation
5
Connect the AirStation’s LAN port to your computer with another LAN cable.
Turn on the AirStation, wait 60 seconds, and then turn on your computer.
6
Conrm that the devices are connected correctly as shown below.
7
After the computer has booted, the LEDs on the AirStation should be in the following condi-
tion:
POWER Green light on
WIRELESS Green light on or blinking
ROUTER Green light on or o depending on your network
DIAG O
LAN Green light on or blinking
INTERNET Green light on or blinking
※
Refer to page 8 and 10 for LED locations and other details.
8
Launch a web browser. If the home page is displayed, setup is complete.
If a user name and password screen is displayed, enter [root] (in lower case) for the user name,
leave the password blank, and click [OK]. Follow the instructions on the screen to complete
setup.
You’ve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.