Operation Manual

LinkStation User Manual 182
Appendix
Error code Descriptions
E04 The rmware is corrupted. Contact Bualo technical support for assistance.
E10 The LinkStation is running on the UPS battery due to a power outage. The system will
now be shut down safely. Check that power is being supplied to the UPS, and if there
are no problems, turn on the LinkStation.
E11 An error occurred in the fan speed. Check that no foreign objects or dust are clogging
the fan. If any foreign objects or dust are found, use a pair of tweezers, air duster, or
other tool to remove them.
If the error is displayed again, contact Bualo technical support for assistance.
E12 System temperature has exceeded the maximum safe value. Do not place objects in
the area around the LinkStation. Also, move the LinkStation to a cooler location.
E15 The bad sectors in the hard drive have reached a dangerous level. Contact Bualo
technical support for assistance.
E16 Unable to nd the hard drive. The drive may be disconnected or may have failed.
Contact Bualo technical support for assistance.
E22 Mounting of hard drive failed. Format the hard drive. After formatting and rebooting,
if the error still appears, contact Bualo technical support for assistance.
E30 The hard drive may be damaged. Contact Bualo technical support for assistance.